TOA Topcoat Part A+B+C (Floorguard 1000 SL), 1 Gallon, Light Grey #7035

• TOA Topcoat Part A+B+C Model Floor Guard 1000 SL  
• Suitable for use as a topcoat on concrete and bitumen surface systems such as sidewalk edges and cement road surfaces. and asphalt road surface
• Suitable for heavy use especially Sports fields and bicycle lanes
• 3-part epoxy topcoat, 1-3 mm thick film, high gloss, does not contain solvents.
• Can level the surface smoothly by yourself, seamless, suitable for concrete floors that are heavily used.
• Easy to clean, does not collect dust, has excellent impact resistance and corrosion from chemicals.
• Contains Microban substances to protect against bacteria. Resistant to chemicals, resistant to water, oil and abrasion.
• Size: 1 gallon
• Light Grey #7035

Technical data

Color film characteristics: shiny

• Dry time to the touch: dry skin
  • Temperature 25 degrees Celsius : 4 hours
  • Temperature 30 degrees Celsius : 3 hours
  • Temperature 35 degrees Celsius : 2 hours
• Drying time for overcoating: Dry hard.
  • Temperature 25 degrees Celsius : 18 hours
  • Temperature 30 degrees Celsius : 16 hours
  • Temperature 35 degrees Celsius : 12 hours
• Complete drying time
  • Temperature 25 degrees Celsius: at least 18 hours, at most 5 days.
  • Temperature 30 degrees Celsius: at least 16 hours, at most 5 days.
  • Temperature 35 degrees Celsius: at least 12 hours, at most 5 days.
• Cumulative average lifespan
  • Temperature 25 degrees Celsius: 45 minutes
  • Temperature 30 degrees Celsius: 30 minutes
  • Temperature 35 degrees Celsius: 20 minutes

surface preparation

• concrete floor
  • To scrape and scrape away cement fragments. or various contaminants completely removed in the case that the surface has a deteriorated original paint film loss of adhesion Scrape off as much as possible. and then clean the surface to be free from grease, dirt and various dust particles before painting the surface must be completely dry. (Can check humidity < 10%)
• polished concrete
  • Sand the surface to be rough. By using Grinding machine or Shot Blast machine to enhance adhesion.
  • If the surface has cracks, pits, and uneven roughness putty filling Repair with Floorguard Putty after the primer painting process has been completed. After that, polish the surface before painting. (Can check humidity < 10%)
• Before applying the next layer of paint
  • Wipe the surface of the paint film with suitable solvents to remove dust, grease, oil, grease, asphalt, salt stains, dirt and various contaminants that adhere to the paint film every time before. Apply the next layer of paint according to SSPC-SP1.
  • If the paint film is left for more than 7 days, polish the surface of the paint film with sandpaper No. 320-400 to increase the adhesion between the paint film layers. After that, wipe clean with suitable solvent according to SSPC-SP1 before coating.
  • In the case of a surface with holes The mess is uneven. putty filling Repair with Floorguard Putty after the primer painting process is completed. Then polish and decorate. Adhesion between layers of paint film After that, wipe clean with suitable solvent according to SSPC-SP1 before coating.

painting system

• Floor work
  • Primer: Floorguard Primer 50 microns x 1 coat
  • Topcoat: Floorguard 1000 SL 1000 micron x 1 coat
• Polished concrete floor work/new concrete
  • Primer: Penetrating Sealer 50 microns x 1 coat
  • Topcoat: Floorguard 1000 SL 1000 micron x 1 coat

Additional suggestions

• The optimum atmospheric relative humidity must not exceed 85% RH.
• The surface temperature must be at least 10 °C and at least 3 °C above the dew point to prevent condensation on the surface. This will affect the adhesion and hardening of the paint film.
• Products need to be stored according to regulations. The lid should be closed tightly at all times. Store in a dry place. There is good ventilation. Shouldn't be stored in a hot place. and do not expose to direct sunlight
• Paint work should be done in a well-ventilated area.
• Do not inhale paint mist directly. You should wear a mask when painting.
• Try to avoid direct skin contact. If the paint comes into contact with the skin, it should be washed immediately with clean water and soap. If splashed into eyes, rinse with clean water immediately. and hurry to see a doctor

Note: Product colors shown on the website There may be differences from the color display settings of each screen.